Setting Pauses; Temporary Switch To Tone Dialling (Dtmf) - Siemens Gigaset A 200 Manual

Operation with a PABX

Setting pauses

Changing pause after line seizure
You can set the length of the pause that is inserted between pressing the talk key
and sending the phone number (default setting: 3 secs.).
[_______________]
MENU
[______]
OK
Changing pause after recall key (dialling pause)
You can change the length of the dialling pause if your PABX requires this (refer to your
PABX operating instructions).
[_______________]
MENU
[______]
OK
To insert a dialling pause between a prefix and a phone number: After
i
entering the prefix, hold down the
the display. Then enter the phone number.

Temporary switch to tone dialling (DTMF)

If your PABX works with pulse dialling but you need tone dialling for a call (e.g. to listen
to an external mail box/answering machine), you must switch to pulse dialling during
the call.
Requirement: You have already started the call.
[_______________]
MENU
[__________] [______________________________________________] [__________]
TEMP TONE
44
Press display key to open menu.
N O 1 L
Press keys
the display. The number for the currently set pause
length flashes. 1 = 1 sec.; 2 = 3 secs.; 3 = 7 secs.;
4 = 2.5 secs.
Enter number and confirm.
Press display key to open menu.
N O 1 2
Enter
play. The number for the currently set pause length
flashes.
1 = 800 ms; 2 = 1600 ms; 3 = 3200 ms.
Enter number and confirm.
Press display key to open menu.
Select and confirm. Tone dialling is set for this call.
OK
. "916 SET" appears in
. "912 SET" appears in the dis-
S
key for 2 seconds. A "P" appears in
c