Time Functions; Set Date And Time - Siemens Gigaset A 200 Manual

Time functions

Set date and time

Settings for date and time are needed to ensure that these are shown correctly for
incoming calls. For the time you can choose between a 12-hour and 24-hour display
(default setting).
Date
[_______________]
MENU
[__________] [______________________________________________] [__________]
BASE SET
[______________________________________________] [__________]
DATE/TIME
[______________________________________________] [__________]
DATE SET
[______]
OK
Time
[_______________]
MENU
[__________] [______________________________________________] [__________]
BASE SET
[______________________________________________] [__________]
DATE/TIME
[__________] [______________________________________________] [__________]
CLOCK SET
[______]
OK
If you want a 12-hour display you must enter
i
confirm with
(AM = 1st half; PM = 2nd half).
Press display key to open menu.
Select and confirm.
OK
Confirm.
OK
Confirm. The current setting is displayed in the for-
OK
mat DD-MM-YY.
Enter day/month/year and confirm.
Example: Press the keys
for "20.05.2003".
Long press (return to idle status).
Press display key to open menu.
Select and confirm.
OK
Confirm.
OK
Select and confirm. The current setting is displayed
OK
in the format HH-MM.
Enter hours/minutes. Example: Press the keys
1 O Q 5
Long press (return to idle status).
and then confirm PM
OK
2 Q Q 5 Q I
for "19.05".
Q M Q 5
for the 2nd half of the day
OK
Time functions
for "19:05",
13