Service (Customer Care) - Siemens Gigaset A 200 Manual

General technical data
Feature
The DECT standard
The GAP standard
Number of channels
Frequency range
Duplex mode
Channel grid
Bitrate
Modulation
Speech coding
Transmission power
Range
Power supply
Environmental requirements for
operation
Dialling methods
Flash time
Dimensions/base station
Dimensions/handset
Weight
Cable lengths

Service (Customer Care)

Our online support on the Internet:
www.my-siemens.de/kundenservice
If you need any repair work, or have a guarantee claim to submit, our
Service-Center Ireland 18 50 77 72 77
will give you quick and reliable assistance. Keep your till receipt handy.
In some countries repair and replace services are impossible where the products are not
sold through our authorised dealers.
Your Gigaset A200 is designed for operation in your country, as indicated on the pack-
aging and on the device itself. Country-specific conditions have been taken into
account. If you have any questions about the differences between the public phone net-
works, please contact your specialist dealer or network provider.
The CE mark attests to the phone's compliance with the essential requirements of the
R&TTE directive.
Value
is supported
is supported
60 duplex channels
1880 – 1900 MHz
Time division, 10 ms frame length
1728 kHz
1152 kbit/s
GFSK
32 kbit/s
Average 10 mW per channel
up to 300 m outside, up to 50 m indoors
Base station 220/230 V ~/50 Hz; (power supply unit
SNG X-a)
+5 °C to +45 °C;
20% to 75% relative humidity
DTMF (tone dialling)/DP (pulse dialling)
120 ms
115 x 102 x 105 mm (W x L x H)
55 x 152 x 30 mm (W × L × H)
Base station 138 g; handset with batteries 117 g
Phone cable length approx. 2 m;
Power cable length approx. 3 m
Appendix
47