Table of Contents
Advertisement
Connecting the base to the PABX
Setting pauses
Changing the pause after line seizure
You can change the length of the pause
that is inserted between pressing the talk
key c and sending the number.
v
Open the main menu.
*#Q5#
L
Press keys.
~
Enter number for the length of
the pause (1 = 1 sec.;
2 = 3 secs.; 3 = 7 secs.) and
press
§OK§
Change pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open the main menu.
*#Q5#
2
Press keys.
~
Enter a number for the length
of the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press
Changing a dialling pause (pause after
access code)
Prerequisite: You have saved an access
¢
code (
page 69).
v
Open the main menu.
*#Q5#
Press keys.
~
Enter number for the length of
the pause
(1 = 1 sec.; 2 = 2 secs.;
3 = 3 secs.; 4 = 6 secs.)
and press
To insert a dialling pause: press and hold
S for 2 seconds. A P appears in the dis-
play.
70
.
.
§OK§
.
§OK§
Switching temporarily to tone
dialling (DTMF)
If your PABX still operates with pulse dial-
ling (PD), but you need tone dialling for a
connection (e.g., to listen to the network
mailbox), you must switch to tone dialling
for the call.
Prerequisite: You are conducting a call or
have already dialled an external number.
*
Press the star key.
After the call ends, pulse dialling is auto-
matically activated again.
Advertisement
Table of Contents
