Switching Temporarily To Tone Dialling; Setting Pauses - Siemens Gigaset 4010 Classic Operating Instructions Manual

Table of Contents

Advertisement

Gigaset 4010 Classic, GB/IRL, A31008-G4010-B101-1-7619
Connecting the base station to a PABX
Press keys:

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
TEMP TONE
361

p. ex.
36-

p. ex.
52

Switching temporarily to tone dialling

If your PABX still operates with dial pulsing (DP) but
tone dialling (DTMF) is required (e.g. to check the mail-
box), you must switch to tone dialling (DTMF) during
the call.
Prerequisite: You are conducting a call!
NNNNNNNNNNNN
Open the menu.
MENU

Select the menu item and confirm.
Tone dialling is active.

Setting pauses

Pause after line seizure
With this function you can set the length of the pause
inserted automatically after pressing the talk key
before transmitting the telephone number.
NNNNNNNNNNNN
Open the menu.
MENU
Initiate the setting.

NNNNNNN
Enter the pause length and confirm.
1 second = 1; 3 seconds = 2; 7 seconds = 3;
2.5 seconds = 4.
The setting is saved.
Pause after recall key
With this function, you can set the length of the pause
that is inserted after holding down the
NNNNNNNNNNNN
Open the menu.
MENU
Initiate the setting.

NNNNNNN
Enter the pause length and confirm.
None = 1; 800 ms = 2; 1600 ms = 3;
3200 ms = 4
The setting is saved.
anlagen.fm
11.06.01

- key.


Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents