Enquiry Calls, Toggling, Conference - Siemens Gigaset A 200 Manual

Enquiry calls, toggling, conference

You can speak with up to two external parties.
Enquiry calls
With this function you can call a second number whilst the person on the first number
is put on hold. Requirement: You are on an external call.
After a conversation lasting approx. 8 secs.:
[_______________]
MENU
[______________________________________________] [__________]
EXTN CALL
[_______________]
MENU
[__________] [______________________________________________] [__________]
END CALL
You can also set up an enquiry call by pressing key
N
You can also take the phone number for the second party from the
N
directory
i
Once you have taken the second call you can toggle between the two
N
calls (see below), or talk with both parties at the same time (see Con-
ference below).
Toggling
You can talk with two different external parties in turn (toggle). The active connection
is displayed.
Requirement: You are on an external call and have then called a second number
(Enquiry calls, page 21).
[_______________]
MENU
[__________] [______________________________________________] [__________]
END CALL
Press display key to open menu.
Confirm. The previous call is held. The caller hears a
OK
message.
Enter the number of the second party. The phone
number is dialled.
You are linked with the second party.
If the second party does not answer, you can toggle
back to the first party by pressing in sequence the
S
keys
End enquiry call:
Press display key to open menu.
Select and confirm. You are reconnected with the
OK
first party.
h
(page 27) or the caller list
Toggle between the two numbers.
End current conversation:
Press display key to open menu.
Select and confirm. You are linked with the waiting
OK
party.
1
and .
Û
(page 29).
Special services
S
.
21