Setting Up Slave Flash Units - Vello FWIRC-C FREEWAVE User Manual

SETTING UP SLAVE FLASH UNITS

You can create a sophisticated lighting
setup by positioning slave flash units
individually or in groups to function as
main, fill, accent, and other lights. Setting
your light ratios at different light outputs
to achieve specific looks gives you a
professional level of creative control.
Line-of-sight
positioning
Group A
Flash Groups with multiple flashes
To set up your slave flash units:
1. Turn on your slave flash and set it to
E-TTL and IR slave modes, as well as
the same group and channel as the
FreeWave IR Commander.
2. After setting your slave flash, mount
the flash and position it with its IR
sensor facing the Commander by
rotating the flash's base.
For information on how to perform
these procedures with your particular
Group B
flash, refer to your flash's manual.
Tip: You can combine multiple slave flashes
within the same group to fire simultaneously.
9