Using The Flash Trigger - Vello freewave fusion User Manual

14

USING THE FLASH TRIGGER

1. Confirm that the power on your Camera,
Transmitter and Receiver is turned on.
2. Press the shutter button on the camera
halfway to wake your flash (if your flash
has a wake-up function).
3. If your flash does not have a wake-up
function, you may be able to turn off
sleep mode. Refer to your flash's manual
for instructions.
4. Fully press the shutter button on your
camera. All lights connected to Receivers
in the currently selected group will fire.
Note: We recommend using a fully manually
controlled flash with this device. Since the
FreeWave Fusion does not transmit TTL settings,
you will need to set the power output manually.