Bkm-15R Monitor Control Unit (Optional); Function Buttons - Sony Trinitron BVM-A32E1WU Operation Manual

BKM-15R Monitor Control Unit (Optional)

The following is the location and function of parts and
controls of the optional BKM-15R Monitor Control Unit.
Front
1 OPERATE lamp
2 "Memory Stick" insertion slot

3 Function buttons

4 Menu operation buttons
a OPERATE lamp
The lamp lights when the unit is turned on.
b "Memory Stick" insertion slot
The standard and duo type "Memory Stick" is available.
Insert the "Memory Stick" (optional).
For inserting/ejecting the "Memory Stick", see page 19.
c Function buttons
Change the operation conditions for the monitor.
Each time the button is pressed, the LED turns on and turns
off, and the operation conditions are changed.
MONO button
button
button
button
EXT BLUE
16 : 9 SYNC ONLY
16:9 button
EXT SYNC button
BLUE ONLY button
(Under scan) button: When this button is pushed in
(ON), the picture is under scanned by 3%, and four
ends of the raster is displayed on the screen.
14
Location and Function of Parts
APT button
COMB button
CHAR OFF button
COL TEMP
button
CHAR COL
MONO APT COMB OFF TEMP
CHROMA
R OFF G OFF B OFF MARKER UP
CHROMA UP
button
MARKER button
R/G/B OFF
button
(H delay) button: When this button is pushed in (ON),
the picture moves horizontally, and a horizontal sync
signal appears.
• Brightness of the picture increases automatically,
and it makes it easy to check the sync part.
• When the button is pressed in H delay mode, a
pulse cross picture is displayed.
(V delay) button: When this button is pushed in (ON),
the picture moves vertically, and a vertical sync signal
appears approximately in the center of the screen.
• Brightness of the picture increases automatically,
and it makes it easy to check the sync part.
• When the button is pressed in V delay mode, a
pulse cross picture is displayed.
MONO button: When this button is pushed in (ON), a
monochrome picture is displayed. When the buttons is
off, the monitor switches automatically between color
and monochrome mode, depending on the color
discrimination of the optional decoder.
Note
The MONO button does not function with the RGB signal
input.
5 DEGAUSS button
6 MONITOR I/1
switch
7 Numeric keypad
8 Monitor select buttons
and lamps
9 MANUAL adjustment
buttons and knobs