Sony Trinitron BVM-A32E1WU Operation Manual page 92

• Connect to the network by using a 10BASE-T/
100BASE-TX cable (shield type, optional).
• When an optional LAN cable is connected, use a shield
type cable to prevent miss-operation due to noises.
• Up to 32 monitors and the BKM-15R (max. 4) can be
connected.
• The monitor is controlled by the BKM-15R within the
same subnetwork.
• Use an optional switching hub with auto select function
(AUTO MDI/MDI-X) of a straight/cross cable.
• Connect the DC 5V OUT connector of the monitor and
the DC 5V IN connector of the BKM-15R by using the
SMF-700. The power is supplied from the monitor via
the DC 5V cable. The connection to the AC IN socket is
not necessary.
Using the BKM-15R with the AC power
Connect the AC power cord supplied with the BKM-15R
to the AC IN socket.
The AC IN connector takes precedence over the DC 5V IN
connector.
When the AC power is used, the connection to the DC 5V
IN connector is not necessary.
22
Connections