Sony Trinitron BVM-A32E1WU Operation Manual page 112

MARKER MODE (3/3) menu
Set the safe title.
SAFE TITLE DISPLAY: Select whether or not to
display the safe title.
Set to OFF (not display) or ON (display) (default
setting is ON).
WIDTH: Set the width of the safe title when SAFE
TITLE DISPLAY is set ON.
Set to 005 to 050(%) (default setting is 020).
HEIGHT: Set the height of the safe title when SAFE
TITLE DISPLAY is set ON.
Set to 005 to 050(%) (default setting is 010).
H POSITION: Set the horizontal position of the safe
title when SAFE TITLE DISPLAY is set to ON.
Set to 000 to 100(%) (default setting is 015).
V POSITION: Set the vertical position of the safe title
when SAFE TITLE DISPLAY is set to ON.
Set to 000 to 100(%) (default setting is 015).
[C4] CHANNEL NAME... menu
Give the channel a name. Select a preset name, or enter a
new one.
PROG: Program signal
EDIT: Signal from an editor
CAM: Camera signal
VTR: Signal from a VTR
PREV: Preview monitor
NEW NAME: Enter a new name. (Up to 20 characters
can be entered and up to 8 characters from the head
of the name are displayed in the INPUT
CONFIGURATION menu).
[C5] COPY FROM menu
Select the source to be copied from.
OTHER CH...: Copy other data in this monitor.
k[C51]
OTHER MONITOR... : Copy data from another
monitor. k[C52]
MEMORY STICK... : Copy data from a file in the
"Memory Stick". k[C53]
[C51] OTHER CH... menu
Assign the source channel number to be copied.
CH NO: Enter the channel number.
[C52] OTHER MONITOR... menu
Assign the ID No. of the source monitor.
MONITOR ID: Enter the ID No. of the monitor from
which to copy data. k[C521]
When the NETWORK switch is set to PEER TO PEER,
this is not selectable.
42
[C] Setting the Input Configuration – INPUT CONFIGURATION Menu
[C521] OTHER MONITOR menu
Assign the channel of the selected monitor from which to
copy data.
CH NO: Enter the channel number.
[C53] MEMORY STICK... menu
Select the file name in the source "Memory
Stick". k[C531]
[C531] MEMORY STICK menu
Assign the channel of the selected file from which to copy
data.
CH NO: Enter the channel number.