Numeric Keypad - Sony Trinitron BVM-A32E1WU Operation Manual

g Numeric keypad
Use to designate the channel number for the input signal to
be monitored, or to enter the setting values with the menus.
INPUT
1
2 3 Del
4
5 6 0
7 8 9 Ent
Channel number entry method
When selecting a channel number from 1 to 9, press one-
digit channel number on the numeric keypad.
When selecting a channel number from 10 to 99, press 0
button, then press the two-digit channel number.
h Monitor select buttons and lamps
When multiple monitors are connected by the network
connection, one particular monitor, monitor group or all
monitors are selected by setting the MONITOR ID No.,
GROUP ID No. or ALL.
REMOTE
SINGLE
GROUP
ALL
SINGLE GROUP ALL
Lamps: The lamp corresponding
with the pressed button blinks
during setting or lights after
confirming.
16
Location and Function of Parts
Del button: Deletes the values and
characters entered.
Numeric buttons
Ent button: Confirms the values
and characters entered (ENTER
button of the menu operation
buttons has the same function).
Display window: Selected ID
No. or ALL is displayed. The
display blinks until the remote
connection is completed.
SINGLE button: Single
connection mode is selected.
GROUP button: Group
connection mode is selected.
ALL button: All connection
mode is selected.
i MANUAL adjustment buttons and knobs
Each press of one of these buttons turns the button's green
LED on or off. When the corresponding button is on (lit),
it is possible to manually adjust the contrast, brightness,
chroma and phase by turning the corresponding knobs. The
PHASE knob is also used to enter the setting values with
the menus. It is possible to set the preset value for each
adjusting item with the PICTURE ADJ menu.
PHASE CHROMA
button and button and
knob knob
CHROMA
PHASE
MANUAL MANUAL
For information about the PICTURE ADJ menu, see "
Picture Adjustment – PICTURE ADJ Menu" on page 31.
Notes
• The signal phase cannot be adjusted when using the
SECAM, PAL, PAL-M, analog component or SDI
(component serial digital or composite PAL) format.
• The phase and chroma cannot be adjusted when using
RGB signals.
BRIGHT CONTRAST
button and button and
knob knob
CONTRAST
BRIGHT
MANUAL MANUAL
[A]