Sony Trinitron BVM-A32E1WU Operation Manual page 100

Main menu
SYSTEM CONFIGURATION [D]
INSTALLATION SETTINGS [E]
FILE MANAGEMENT [F]
STATUS [G]
CONTROLLER [H]
KEY PROTECT [I]
30
Menu Structure
Level 1
NETWORK [D1]
PARALLEL REMOTE [D2]
POWER [D3]
BLANKING SETTINGS [D4]
ON SCREEN SET [D5]
PASSWORD [D6]
GAMMA SW
MAINTENANCE [D7]
LANDING ADJUST [E1]
ALIGNMENT [E2]
DIGITAL UNIFORMITY ADJ [E3] Adjusts the color unevenness of the CRT. (page 50)
SAVE TO [F1]
COPY FROM [F2]
DELETE [F3]
DATA MAINTENANCE [F4]
CH STATUS [G1]
SLOT STATUS [G2]
MODEL NAME
SERIAL NO
SOFTWARE VERSION
OPERATION TIME
CRT TURN ON TIME
IP ADDR
CONTROLLER STATUS [G3]
MONITOR ID DISPLAY [H1]
NETWORK SETTING [H2]
NETWORK SW
SNMP SETTINGS [H3]
Functions
Sets the system of the remote control function, LAN, etc. (page
43)
Sets the IP address, subnet mask and default gateway. (page 44)
Sets the remote control function. (page 44)
Sets the condition of the monitor when the main power or
MONITOR I/1 switch is turned on. (page 45)
Adjusts the data for the picture. (page 45)
Sets the data for the screen display. (page 45)
Sets the passwords for the menu. (page 46)
Sets the gamma switch. (page 44)
Displays the menu for maintenance. (page 46)
Sets the initial value of landing, alignment, etc. (page 46)
Corrects the shift of beam landing caused by the earth's
magnetism. (page 47)
Adjusts the position and size of the picture. (page 47)
Saves, copies and deletes the system data. (page 52)
Writes the data. (page 53)
Reads or copies the data. (page 53)
Deletes the file. (page 53)
Services the system data. (page 53)
Displays the information about the monitor or options installed in
the monitor. (page 54)
Displays the information of the used channel. (page 55)
Displays the data about the optional board installed in the option
slot 1 to 3. (page 55)
Displays the model name. (page 55)
Displays the serial number. (page 55)
Displays the software version. (page 55)
Displays the operation time. (page 55)
Displays how long the CRT is used. (page 55)
Displays the IP address of the monitor. (page 55)
Displays the information on the controller. (page 55)
Sets the network of the controller. (page 56)
Sets the display method of the monitor select display window.
(page 56)
Displays the NETWORK SETTING menu. (page 56)
Sets the Ethernet connections. (page 56)
Sets CONTACT, NAME, LOCATION and TRAP. (page 56)
Sets whether or not to lock the buttons on the control unit. (page
57)