Connections; Connecting To The Bkm-15R; Connecting To The Network - Sony Trinitron BVM-A32E1WU Operation Manual

Connections

Connecting to the BKM-15R

NETWORK
Monitor
LAN
PEER TO PEER
Set to PEER TO
PEER.
DC 5V OUT connector
When the AC power cord
is connected to the BKM-
15R, do not connect this SMF-700, etc.
cable.
NETWORK
LAN PEER TO PEER
Set to PEER TO PEER.
BKM-15R
AC IN socket
Notes
• Turn off the MAIN POWER switch of the monitor
before connecting the units.
• Set the NETWORK switch of the monitor and the BKM-
15R to PEER TO PEER.
• Connect the LAN (10/100) connector of the monitor and
the LAN (10/100) connector of the BKM-15R by using a
10BASE-T/100BASE-TX straight LAN cable (shield
type, optional) or the SMF-700.
• When an optional LAN cable is connected, use a shield
type cable to prevent miss-operation due to noises.
• Connect the DC 5V OUT connector of the monitor and
the DC 5V IN connector of the BKM-15R by using the
SMF-700.
The power is supplied from the monitor via this cable.
The connection to the AC IN socket is not necessary.
LAN (10/100) connector
DC 5V IN
LAN (10/100)
connector
connector
Using the BKM-15R with the AC power
Connect the AC power cord supplied with the BKM-15R
to the AC IN socket.
The AC IN connector takes precedence over the DC 5V IN
connector.
When the AC power is used, the connection to the DC 5V
IN connector is not necessary.

Connecting to the Network

NETWORK
LAN
PEER TO PEER
Set to LAN
Monitor
DC 5V OUT
connector
LAN (10/100)
connector
When the AC power
cord is connected to
the BKM-15R, do not
connect this cable.
DC 5V IN connector
BKM-15R
AC IN socket
NETWORK
LAN
Set to LAN.
Notes
• Turn off the MAIN POWER switch of the monitor
before connecting the units.
• Set the NETWORK switch of the monitors and the
BKM-15R to LAN.
Monitor
LAN (10/100) connector
Switching hub (with
AUTO MDI/MDI-X
function)
LAN (10/100)
connector
PEER TO PEER
Connections
21