Vdo Computer 1 Universal Handlebar Holder - VDO X2 Instruction Manual

GB SLO PL JP
Preface
Congratulations
With your selection of a VDO computer you have opted for a technically very high quality appliance.
In order to fully benefit from the potential of the computer, we recommend that you carefully read this
manual. It contains all operating instructions and many other useful tips.
We hope you enjoy cycling with your VDO bike computer.
Cycle Parts GmbH
Pack contents
Please first check that this pack is complete:
1 VDO computer 1 universal handlebar holder
with cable and sensor
Battery installed
1 rubber pad 1 spoke magnet
for sensor (clip magnet)
2 X2
Table of contents
1. Display
2. Operation
3. Information functions in function mode
4. Installation
4.1
4.2
4.3
cable ties
for fitting the holder
and sensor
VDO CYCLECOMPUTING www.vdocyclecomputing.com
4
6
7
8
Fitting the sensor, magnet
and handlebar holder 8
Installing the battery in the computer 9
Placing the computer into
the handlebar holder 9
JP PL SLO
5. Basic settings
5.1 Setting the language
5.2 Setting and measuring the wheel size
5.2.1 Select from tyre table
5.2.2 Setting using wheel circumference
5.3 Setting the clock
5.4 Setting the total kilometres
5.5 Switch from bike 1 to bike 2
5.6 Service interval display
5.7 The navigator
5.8 Sleep mode
5.9 Reset functions
6. Terms of guarantee
7. Technical spezifications
8. Troubleshooting
„>>> P02" links at the beginning of a chapter
are related to the respective picture in the
picture book!
X2
GB
10
10
10
10
12
13
13
14
15
16
17
17
18
18
19
3