Troubleshooting; Technical Spezifications - VDO X2 Instruction Manual

D GB F I

7. Troubleshooting

Here you can find a list of possible faults, their causes and what you can do about them:
Error Possible cause
Half segments on the display Computer software not running
(e.g. after a battery change) correctly after battery change
No speed display Distance from sensor to
magnet too big
No speed display Computer not properly clicked
in the handlebar holder
No speed display Wheel circumference is not
correctly set or is at zero
Display becomes weak Battery dead
Display becomes weak Temperatures under 5° make
the display sluggish
40 X2

8. Technical spezifications

Computer:
approx. 45 x 52 x 16 mm, weight: approx. 45 g
Correction Handlebar holder:
weight: approx. 15 g
Take out battery and insert Sensor:
again weight approx. 20 g
Computer battery:
Correct position of sensor 3V, type 2032
and magnet Battery life-span:
1200 cycling hours, approx. 24,000 km (15.000 M)
Place computer head in the Working temperature of the display:
handlebar holder, twist until -15 °C to +60 °C
it clicks Speed range:
for wheel size 2155 mm, min 2.5 km/h,
Set wheel circumference max 199.5 km/h
Check battery, replace if nec.
At normal temperatures the
display will work normally
again
VDO CYCLECOMPUTING www.vdocyclecomputing.com
I F GB
Ride time measurement range:
up to 23:59:59 HH:MM:SS
Stopwatch measurement range:
up to 23:59:59 HH:MM:SS
Day's trip counter measurement range:
up to 999.99 km or mi
Navigator measurement range:
up to 999.99 km or mi
Total KM 1 and 2 measurement range:
up to 99,999 km or mi
Total kilometers measurement range:
up to 199,999 km or mi
Wheel circumference setting range:
from 100 mm to 3999 mm (3.9 to 157.4 inches)
X2
D
41