Step 2: Install The 802.11G Mini-Pci Wireless Card - AMX NXD-1200V Operation/Reference Manual

Touch Panel Accessories
Unscrew these
eight Housing
Screws to remove
the circuit board
REMOVE
these screws
They secure
the speakers
to the main
FIG. 17 Location of the attachment screws underneath an NXT panel base
4.
Rotate the panel back over (while gripping the entire unit with outer housing) and rest the base on a flat surface.
5.
Gently tilt the LCD backward to a 45° angle.
6.
In a single motion, carefully pull the outer housing up and then out (away from the LCD panel) to expose the
internal circuit board.
7.
Unscrew the Stereo Output nut from the Stereo Output jack.
8.
Firmly grab the existing connector plate and slide it up and away from the base.

Step 2: Install the 802.11g mini-PCI Wireless Card

1.
Discharge any static electricity from your body by touching a grounded metal object.
2.
Locate the mini-PCI card connector on the main board (FIG. 18 and FIG. 19).
NXA-PCI80211G
Eight Housing
Screws
FIG. 18 Location of the NXA-PCI80211G wireless card on the NXT board
16
housing
DO NOT
board
wireless card
location
I/O connector
plate
Base plate
Outer housing
45°
Outer Housing
NXD/T-1200V Wall/Flush Mount Touch Panel
Hinge Brackets (2)
Compact Flash card