Setting The Delayed Transmission; Changing/Deleting Delayed Transmission - Kyocera FAX System 10 Operation Manual

Sending Faxes > Setting the Delayed Transmission

Setting the Delayed Transmission

Changing/Deleting Delayed Transmission

You can change or delete the destinations of delayed transmission.
Use the procedure below to check a job's information.
1
2
Display the screen.
1
[Status/Job Cancel] key > [Sending Jobs] > [Scheduled Job]
2
Select the job you want to change or delete from the list > [Detail]
Detailed information of the selected job is displayed.
3
Select [Detail/Edit] in Status/Destination.
Changing.
When adding another destination
1
Select the address to be added from the Address Book or enter the fax number using the
numeric keys.
When selecting [Address Book]
Select the destination you want to change in the list > [OK]
When entering the fax number using the numeric keys
Enter the fax number using the numeric keys > [OK]
2
Select [OK].
NOTE
When On is selected in Entry Check for New Dest., a confirmation screen is displayed for
the entered FAX number. Re-enter the same FAX number and select [OK].
Machine's Operation Guide
When [New Destination Entry(FAX)] is set to [Prohibit], the numeric keys cannot be
used to enter a fax number.
New Destination Entry(FAX) (page 8-11)
When changing the destination to another destination
1
Select the destination you want to change > [Detail/Edit]
You can change the selected destination.
2
Select [OK].
When deleting the destination
Select the destination you want to delete > [Delete] > [OK]
3-26