Kyocera FAX System 10 Operation Manual page 32

Before Using the Fax Machine > Registering Destinations in the Address Book
4
5
Configure the transmission settings.
1
Select [ ] of Mode and select [Simple] or [Full].
Transmission mode
Simple mode
Full mode
2
Select [ ] of Via Server and select [On] or [Off].
When this setting is set to [Off], transmission takes place by direct SMTP (not through an
e-mail server).
When this setting is set to [On], transmission takes place by the i-FAX method (through an
e-mail server).
3
Select [Change] of "Paper Size".
4
Specify the destination conditions and select [OK].
Item
Resolution
Compression
Paper Size
Register the destination.
1
Check if the destination has been set correctly, and select [Save].
The destination is added to the Address Book.
2
The one-touch key registration confirmation screen appears. Select [Yes] or [No].
If you selected [Yes], the one-touch key registration screen appears. Go to the next step.
If you selected [No], registration ends.
3
Select the One-touch key number to which to register the destination > [Next] > Select the
destination to which to register > [Next]
The destination details can be changed by selecting the destination and selecting [Detail].
4
Select [Change] for [Display Name] and [Destination] to change the settings as needed.
5
Select [Register].
If the one-touch key has already been registered, the overwrite registration confirmation
screen appears. Select [Yes] or [No].
Transmission confirmation is not sent to the destination machine.
Transmission confirmation is sent to the destination machine.
Specify the resolutions that can be received by the destination fax
machine.
If you try to send an i-FAX using a prohibited resolution, it is
automatically changed to a permitted resolution and then sent.
• 200 × 100 dpi: Permitted (fixed)
• 200 × 200 dpi: Permitted (fixed)
• 200 × 400 dpi: Permitted or prohibited
• 400 × 400 dpi: Permitted or prohibited
• 600 × 600 dpi: Permitted or prohibited
To permit a resolution setting, select the key for that resolution so that
it is highlighted.
To prohibit a resolution, select the key again so that it is no longer
highlighted.
Select a suitable file format for the destination fax machine.
MH, MR, MMR or JBIG
Display the sending paper size for the destination fax machine.
• A4/Letter: Permitted (fixed)
2-16
Description
Description