Playing Telephone Messages; Remote Control Features; Registering The Password For Remote Control - Canon FAX-B840 User Manual

Playing telephone messages

Telephone messages will be played back in order from the oldest message recorded. If a voice memo has been
recorded, it will be played back first.
1 Press [Play].
The day and time when the telephone message was recorded, the number of telephone messages
and the number of the message being played (ICM No.) are displayed whenever a message is
played.
• Press [
• Press [
• Press [
• Press [Stop] to stop playback.
• Press [Delete] during playback to delete a message.
• Use [
Follow the procedures below to delete all messages.
1 Press [Delete], then press
• A voice memo is not deleted (see p. 43).
• If you decide not to delete all messages, press [#].

Remote control features

Use these features when you call home to play back any messages you may have received. You can also use the
remote control features to set TAM MODE.
You must register a four-digit PIN as your password before you can use these features (see below).

Registering the password for remote control

1 Press [Function], then press [Start/Copy].
2 Use [ ] or [
3 Use [ ] or [
4 Use the numeric buttons to enter a four-digit PIN as your password, then press [Start/Copy].
5 Press [Stop].
Registration ends and the fax returns to standby mode.
44
] to listen to the message again. (Repeat)
] to play the next message. (Skip)
] twice to play the previous message.
] or [ ] to change the volume.
to delete all messages.
] to select TAM SETTINGS, then press [Start/Copy].
] to select PASSWORD, then press [Start/Copy].
SUN 17:15 02/05
PASSWORD 1234