Table of Contents
Advertisement
Setting the options for automatic redialling
You can set the following options for automatic redialling:
• Whether or not the fax redials automatically.
• The number of times the fax attempts to redial.
• The time interval between redialling attempts.
1
Press [Function], then press [Start/Copy].
2
Use [
] or [
] to select TX SETTINGS, then press [Start/Copy].
3
Use [
] or [
] to select AUTO REDIAL, then press [Start/Copy].
• To disable automatic redialling, use [
[Stop] to return to standby mode.
• To enable automatic redialling, use [
below.
4
Press [Start/Copy] twice.
5
Use the numeric buttons to enter the number of times you want the fax
to redial, then press [Start/Copy] twice.
6
Use the numeric buttons to enter the time interval between redialling attempts, then press
[Start/Copy].
7
Press [Stop].
The fax returns to standby mode.
Delayed sending
Your fax can send a document automatically at a preset time. This allows you to take advantage of lower late-night
long-distance rates offered by some telephone companies.
The fax can only register one preset sending operation at a time.
1
Load the document face up into the document tray (see p. 24).
2
Press [Function], then press [Send Options].
3
Use [
] or [
] to select DELAYED TX, then press [Start/Copy].
4
Enter the desired sending time using the numeric buttons, then press [Start/Copy].
• Set the time using the 24-hour clock system. Precede single digits with a zero.
Example: 3:00 p.m. = 15:00
• Press [Clear] if you need to re-enter the time.
] or [
] to select OFF, then press [Start/Copy]. Press
] or [
] to select ON and continue with the steps
ON
2TIMES
2MIN.
SET TIME
15:00
5
31
Advertisement
Table of Contents
