Testing The Fax - Canon B820 User Manual

Align the slot in the cartridge with the yellow post in the fax, and with the label facing
6
outwards, insert the BJ cartridge into the cartridge holder. Lower the cartridge lock lever
until you hear a click to lock the cartridge in place.
The yellow post (BJ cartridge guide) should be visible through the slot. The BJ cartridge tilts slightly to
the left before lowering the cartridge lock lever.
7 Close the printer cover.
If the AUTO TEST PRINT setting is set to ON:
The fax automatically prints a test page every time you insert a BJ cartridge.
You can turn off automatic test printing by changing the AUTO TEST PRINT setting. See SYSTEM
SETTINGS, p. 8-5.
• Do not try to manually move or stop the cartridge holder.
• Do not touch the components shown below or any metal parts.
Ribbon
cable
Round shaft

Testing the fax _________________________________

After you have assembled the fax, loaded the paper, and installed the BJ cartridge, you can make
sure the fax is printing properly by making several copies of a document (see p. 4-1).
If you have problems printing, see Chapter 9.
1-10
Guide rail
Circuit board