Report Settings - Canon FAX-B840 User Manual

Name
VOLUME CONTROL
LINE MONITOR VOL
ALARM VOLUME
KEYPAD VOLUME
RX CALL LEVEL
TEL LINE TYPE
R-KEY SETTING
PSTN
PBX
AUTO VOICE DIAL

REPORT SETTINGS

Name
TX REPORT
RX REPORT
ACTIVITY REPORT
AUTO PRINT
TX/RX SEPARATE
50
Description
Set the volume of the fax sounds.
Set the volume of the line monitor (sound during dialling).
Set the volume of the error alarm sound.
Set the volume of the keypad.
Set the ring tone.
Set the dialling method the fax uses to match the type of
phone line you have.
Set the type of connection for your fax.
Your fax is connected to an outside line.
ACCESS TYPE: Set the access line type for the PBX.
ACCESS NUMBER: If you select PREFIX, you can enter an
outside line number of up to 19 digits.
Enable/disable automatic dialling for UCanTalk.
Description
Enable/disable automatic printing of the transmission report.
OUTPUT NO: Turn off the activity report feature.
OUTPUT YES: Set the fax to print an activity report every
time you send a document.
PRINT ERROR ONLY: Print only when an error occurs
during sending.
Enable/disable automatic printing of the reception report.
OUTPUT NO: Turn off the activity report feature.
OUTPUT YES: Set the fax to print an activity report every
time you receive a document.
PRINT ERROR ONLY: Print only when an error occurs
during receiving.
Enable/disable automatic printing of the activity report.
When you set ON, your fax is set to print an activity report for
every 20 transactions (sending and receiving).
Divide the activity management report into sending and
receiving transactions.
Settings
–
0 (off)/1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
STANDARD/HIGH
TOUCH TONE/
ROTARY PULSE
PSTN/PBX
–
PREFIX/HOOKING
–
ON/OFF
Settings
OUTPUT NO/
OUTPUT YES/
PRINT ERROR ONLY
OUTPUT NO/
OUTPUT YES/
PRINT ERROR ONLY
–
OUTPUT NO/
OUTPUT YES
ON/OFF