Canon FAX-B840 User Manual page 53

TAM SETTINGS (FAX-B840 only)
Name
MESSAGE LENGTH
PASSWORD
TOLL SAVER
RING COUNT
FWD SETTINGS
FWD TEL NUMBER
AUTO REDIAL
PIN ENTRY
TAM MONITOR
CALLER ID
Name
CALLER ID
ANONYMOUS*
SELECTIVE*
OUT OF AREA*
SHOW IN HISTORY?*
* FAX-B840 only.
Description
Set the maximum recording time for each recorded message. 0 seconds/30 seconds/
Set a four-digit PIN so that you can access the fax from
remote locations.
Setting this feature to ON allows calls to be picked up after 2
rings when you have a new message.
If you set TOLL SAVER to OFF, this feature allows you to set
the number of times the fax rings.
Allows you to forward messages.
Forwarding telephone number.
A maximum of 40 digits can be entered.
Redial the previously dialled number.
REDIAL TIMES: Set the number of retries.
REDIAL INTERVAL: Set the period of time between
redialling attempts.
PIN confirmation
Allows you to screen all incoming calls.
Description
Determine if the fax displays the caller's name and phone/fax
number when receiving a call.
Allows you to reject anonymous calls.
REJECTION METHOD: Set the way the fax rejects calls.
Allows you to reject calls from specific numbers.
NUMBER TO REJECT (00-09): Set the phone/fax numbers
to be rejected.
A maximum of 20 digits can be entered.
REJECTION METHOD: Set the way the fax rejects calls.
Allows you to reject out-of-area calls.
REJECTION METHOD: Set the way the fax rejects calls.
Determine if the fax stores the phone/fax numbers for
rejected calls.
Settings
60 seconds/120
seconds
1234 (0000 to 9999)
ON/OFF
2 times (1 to 15)
ON/OFF
–
ON/OFF
2 times (1 to 10)
2 minutes (2 to 99)
ON/OFF
ON/OFF
Settings
ON/OFF
ON/OFF
DISCONNECT/
PLAY MESSAGE
ON/OFF
_
DISCONNECT/
PLAY MESSAGE
ON/OFF
DISCONNECT/
PLAY MESSAGE
YES/NO
8
53