Load Balance - Draytek Vigor2860 Series User Manual

3 . 1 4 . 7 L o a d B a l a
3 . 1 4 . 7 L o a d B a l a
The parameters configured for Load Balance can help to distribute the traffic for all of the
access points registered to Vigor router. Thus, the bandwidth will not be occupied by certain
access points.
Available settings are explained as follows:
Item
Enable
Mode
n c e
n c e
Description
Check the box to enable such function.
It is used to determine the operation mode when the system
detects overload between access points.
By Station Number –The operation of load balance will be
executed based on the station number configured in this page.
It is used to limit the allowed number for the station connecting
to the access point. The purpose is to prevent lots of stations
connecting to access point at the same time and causing traffic
343
Vigor2860 Series User's Guide