Telnet Command: Ip Bindmac - Draytek Vigor2860 Series User Manual

on
off
default [tx_rate][rx_rate]
status
show
add
del
IP1-IP2
tx
rx
shared
E x a m p l e
E x a m p l e
> ip bandwidth default 200 800
> ip bandwidth add 192.168.1.50-192.168.1.100 10 60
> ip bandwidth status
IP range:
192.168.1.50 - 192.168.1.100 : Tx:10K Rx:60K
Current ip Bandwidth limit is turn off
Auto adjustment is off
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows users to set IP-MAC binding for LAN host.
ip bindmac on
ip bindmac off
It means to turn on the IP bandwidth limit.
It means to turn off the IP bandwidth limit.
It means to set default tx and rx rate of bandwidth limit.
The range is from 0 – 65535 Kpbs.
It means to display the current settings.
It means to display all the bandwidth limits settings
within the IP range.
It means to add the bandwidth within the IP range.
It means to delete the bandwidth within the IP range.
It means the range of IP address specified for this
command.
It means to set transmission rate for bandwidth limit.
It means to set receiving rate for bandwidth limit.
It means that the bandwidth will be shared for the IP
range.
: i p b i n d m a c
: i p b i n d m a c
607
Vigor2860 Series User's Guide