Telnet Command: Ipf Set - Draytek Vigor2860 Series User Manual

-t
-z
-Z
E x a m p
E x a m p
> ipf view -V -c -d
ipf: IP Filter: v3.3.1 (1824)
Kernel: IP Filter: v3.3.1
Running: yes
Log Flags: 0x80947278 = nonip
Default: pass all, Logging: available
T e l n e t C o m m
T e l n e t C o m m
This command is used to set general rule for firewall.
ipf set [Options]
ipf set [SET_NO] rule [RULE_NO] [Options]
S y n t a x
S y n t a x
Parameter
Options
SET_NO
RULE_NO
-v
-c [SET_NO]
-d [SET_NO]
-l [VALUE]
Vigor2860 Series User's Guide
It means to display all the information at one time.
It means to clear a filter rule's statistics.
It means to clear IP filter's gross statistics.
l e
l e
a n d : i p f s e t
a n d : i p f s e t
D e s c r i p t i o n
D e s c r i p t i o n
Description
There are several options provided here, such as -v, -c
[SET_NO], -d [SET_NO],... and etc.
It means to specify the index number (from 1 to 12) of
filter set.
It means to specify the index number (from 1 to 7) of
filter rule set.
Type "-v" to view the configuration of general set.
It means to setup Call Filter, e.g., -c 2. The range for the
index number you can type is "0" to "12" (0 means
"disable).
It means to setup Data Filter, e.g., -d 3. The range for
the index number you can type is "0" to "12" (0 means
"disable).
It means to setup Log Flag, e.g., -l 2
626