Draytek Vigor2860 Series User Manual page 167

Available settings are explained as follows:
Item
Index
Enable
Protocol
Interface
Priority
Src IP Start
Src IP End
Dest IP Start
Dest IP End
Dest Port Start
Dest Port End
Move UP/Move Down
Wizard Mode
Advance Mode
To use Wizard Mode, simple do the following steps:
1. Click the Wizard Mode radio button.
Description
Click the number of index to access into the configuration
web page.
Check this box to enable this policy.
Display the protocol used for this policy.
Display the interface to send packets to once the policy is
matched.
Display the priority of the selected profile in data
transmission.
Displays the IP address for the start of the source IP.
Displays the IP address for the end of the source IP.
Displays the IP address for the start of the destination IP.
Displays the IP address for the end of the destination IP.
Displays the IP address for the start of the destination port.
Displays the IP address for the end of the destination port.
Use Up or Down link to move the order of the policy.
Allows to configure frequently used settings of route policy
via three setting pages
Allows to configure detailed settings of route policy.
153
Vigor2860 Series User's Guide