Telnet Command: Vpn Mss - Draytek Vigor2860 Series User Manual

This command allows users to enable or disable NetBios for Remote Access User Accounts or
LAN-to-LAN Profile.
vpn NetBios set <H2l/L2l> <index> <Block/Pass>
S y n t a x D e
S y n t a x D e
Parameter
<H2l/L2l>
<index>
<Block/Pass>
E x a m p l e
E x a m p l e
> vpn NetBios set H2l 1 Pass
% Remote Dial In Profile Index [1] :
% NetBios Block/Pass: [PASS]
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows users to configure the maximum segment size (MSS) for different TCP
types.
vpn mss show
vpn mss default
vpn mss set <connection type> <TCP maximum segment size range>
S y n t a x D e
S y n t a x D e
Parameter
show
default
s c r i p t i o n
s c r i p t i o n
Description
H2l means Remote Access User Accounts.
L2l means LAN-to-LAN Profile.
Specify which one will be applied by NetBios.
The index number of the profile.
Pass – Have an inquiry for data transmission between
the hosts located on both sides of VPN Tunnel while
connecting.
Block – When there is conflict occurred between the
hosts on both sides of VPN Tunnel in connecting, set it
block data transmission of Netbios Naming Packet
inside the tunnel.
: v p n m s s
: v p n m s s
s c r i p t i o n
s c r i p t i o n
Description
It means to display current setting status.
TCP maximum segment size for all the VPN connection
will be set as 1360 bytes.
743
Vigor2860 Series User's Guide