Telnet Command: Ip Session - Draytek Vigor2860 Series User Manual

% ip dmz <mac>,
> ip dmz 11-22-33-44-55-66
> ip dmz ?
% ip dmz <mac>,
>
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows users to set maximum session limit number for the specified IP; set
message for exceeding session limit and set how many seconds the IP session block works.
ip session on
ip session off
ip session default [num]
ip session defaultp2p [num]
ip session status
ip session show
ip session timer [num]
ip session [block/unblock][IP]
ip session [add/del][IP1-IP2][num][p2pnum]
S y n t a x D e
S y n t a x D e
Parameter
on
off
default [num]
Defautlp2p [num]
status
show
timer [num]
[block/unblock][IP]
now : 00-00-00-00-00-00
now : 11-22-33-44-55-66
: i p s e s s i o n
: i p s e s s i o n
s c r i p t i o n
s c r i p t i o n
Description
It means to turn on session limit for each IP.
It means to turn off session limit for each IP.
It means to set the default number of session num limit.
It means to set the default number of session num limit
for p2p.
It means to display the current settings.
It means to display all session limit settings in the IP
range.
It means to set when the IP session block works.
The unit is second.
It means to block/unblock the specified IP address.
Block: The IP cannot access Internet through the router.
605
Vigor2860 Series User's Guide