Delete All Data; Software Options; Finisher Adjustment - Fuji Xerox ApeosPort-V C5575 Administrator's Manual

EP Registration
 BB Registration
Select [BB Registration] and then select [Start] to register the machine in EP system.
 EPA Server Registration
After the BB registration, [EPA Server Registration] is automatically selected in accordance
with your environment. When this feature is selected, enter the destination server IP of your
EPA server and then select [Start] to register the machine in the EPA server.
Initialize Hard Disk
Initializes the hard disk.
Data deleted by initialization includes supplementary fonts, ESC/P, and HP-GL/2 forms.
Note

Delete All Data

This feature is designed to prevent the leakage of confidential information of a customer
when the machine is returned to Fuji Xerox. All data stored on the machine will be deleted.
Before executing the operation, make sure that the operation is absolutely necessary.
Note

Software Options

This feature is for service representative use. For more information, contact our Customer
Support Center.
Power on Self Test
Set whether or not to perform self test when the machine is turned on and started up.
If any abnormal condition such as intentional program modification is found during the
program diagnosis, the machine stops starting up and records the information in the audit
log.
Note
Check Smart Card Details
When you select [Check Smart Card Details] and touch your smart card to the smart card
reader, the information of the smart card appears on the touch screen.
Note
Important • To display the online help for CentreWare Internet Services, users need to have the environment to

Finisher Adjustment

This feature is available when the Finisher-B1/Booklet Maker Unit for Finisher-B1 is installed
with a hole punch kit or C3 Finisher/C3 Finisher with Booklet Maker is installed with a punch
unit.
 Hole Punch Tool
Specify either [2/4 Hole Punch] or [2/3 Hole Punch (US Specification)].
• The secure print documents and logs are not erased.
• It takes several minutes to several hours to delete all data. (The time taken depends on the machine
configuration or the hard disk capacity.)
• The information may not be recorded in the audit log depending on the status of program
malfunction.
• If the machine does not start, contact our Customer Support Center.
• You can register the authentication information using CentreWare Internet Services. For more
information, refer to the help of CentreWare Internet Services.
connect to the Internet. The communication fee shall be borne by you.
Common Service Settings
179
5