5 Tools
Set the passcode after setting the system administrator's user ID. You can set the passcode
from 4 to 12 characters.
For more information about [Passcode Entry for Control Panel Login], refer to "Passcode Policy" (P.329).
1
Select [System Administrator's Passcode].
2
Select [New Passcode].
3
Enter a new passcode (4 to 12 digits) using the
keyboard displayed, and then select [Save].
Note
4
Select [Retype Passcode], enter the same
passcode, and then select [Save].
5
Select [Save].
6
A confirmation window appears. Select [Yes] to confirm your entry.
Authentication
In [Authentication], you can set the following items.
The following shows the reference section for each setting.
5
Login Type ..................................................................................................................................................................................... 324
Access Control............................................................................................................................................................................... 325
Create/View User Accounts....................................................................................................................................................... 326
Reset User Accounts.................................................................................................................................................................... 326
Create Authorization Groups .................................................................................................................................................... 326
User Details Setup ....................................................................................................................................................................... 327
Maximum Login Attempts by System Administrator.......................................................................................................... 329
Passcode Policy............................................................................................................................................................................. 329
Charge/Private Print Settings ................................................................................................................................................... 330
Receive Control............................................................................................................................................................................. 330
Login Type
Allows you to select a type of authentication.
No Login Required
Does not use the Authentication feature.
Login to Local Accounts
Authenticates users based on the user information registered on the machine.
Note
Login to Remote Accounts (ApeosPort Series Models Only)
Authenticates users based on the user information registered on a remote authentication
server.
Note
324
• If no passcode is set, leave the text boxes
blank and select [Save].
• When [Login to Local Accounts] is selected, the machine enters the Login mode and [Login] is
displayed at the lower left of the Services Home screen.
• When [Login to Remote Accounts] is selected, the machine enters the Login mode and [Login] is
displayed at the lower left of the Services Home screen.