Installing The 3Ware Driver On A Suse Linux System That Boots From A Different Device - AMCC 3ware Installation Manual

9 Return to the installation by pressing Alt+F7.
10 Click OK to finish the installation.
Installing the 3ware Driver on a SuSE Linux
System that Boots from a Different Device
1 Log in as root.
2 Edit /etc/sysconfig/kernel and make sure the file contains the
following line:
INITRD_MODULES="3w-9xxx"
Other modules may be listed before or after 3w-9xxx,
Note:
depending on the installation. You may see entries like reiserfs,
ext3 or scsi_mod. If present, leave them (ensuring there is a
space between each module name), since the system needs
them to boot properly.
Note about variables:
<kernel string> with the kernel version you are using (i.e.
2.4.18-4GB, etc.), replace *** with your version of SuSE,
(su90 for SuSE 9.0, and su91 for SuSE 9.1).
In addition, replace 3w-9xxx.* with the appropriate
module file for your kernel. The available module files
are:
For UP kernels: 3w-9xxx.o or 3w-9xxx.ko
For SMP kernels: 3w-9xxx.smp
For BigSMP (high memory) kernels: 3w-9xxx.big
www.3ware.com
Driver Installation Under SuSE Linux
In the instruction below, replace
81