Table of Contents
Advertisement
Table 3: Working in 3BM
To do this
Specify (or unspecify) a drive as a
hot spare
Unlock the drives in a unit, so that
they can be removed and used with
a controller other than a 9000-series
controller.
Return to starting values for this
session in the 3ware BIOS Manager
Display the Advanced Detail screen,
where you can see the software
versions (BIOS, Firmware, monitor)
and slot # of the 3ware card.
Return to the main 3ware BIOS
Manager screen, from the Advanced
Details screen
Move a highlighted unit up or down
in the list of exportable units
(The top-most unit will become the
bootable unit, if you install the OS.)
Display context sensitive help
If you have multiple 3ware
controllers in your system, return to
the board selection screen.
Exit the utility and save or abandon
all changes.
Exit the utility and save all changes
www.3ware.com
Working with the 3ware BIOS Manager (3BM)
Use these keys
S
R (Remove)
F6
Note: F6 cannot bring back
previous policy settings; they
are saved when you exit the
Policy screen.
Shift+F5
Any key
Page Up
Page Down
[Available only when there are
multiple units and a unit is
highlighted.]
F1 or Alt+F1
Esc
Esc
F8
39
Advertisement
Table of Contents
