Table of Contents
Advertisement
Installing the Hardware
For a discussion of whether to make these connections, see
"Whether to Use the LED Status Connector" on page 11 and
"Additional Details About the LED Status Connectors" on
page 15.
4
(Optional) If staggered spinup is desired (and supported by
your hard drives), set the appropriate jumpers on your hard
drives to enable staggered spinup.
Later, you will need to enable staggered spinup and specify the
staggered method (ATA-6 or SATA OOB) in the 3ware BIOS
Manager (3BM). For more information, see the 3ware 9000
Series Serial ATA RAID Controller User Guide.
5
Turn to "Check your Installation and Close the Case" on
page 22.
18
3ware 9000 Series Serial ATA RAID Controller Installation Guide
Advertisement
Table of Contents
