Table of Contents
Advertisement
Appendix A. Installing the Battery Backup Unit
Tools and equipment required
Phillips-head screwdriver
Grounding strap
Battery Backup Unit (BBU) and battery
3ware 9000 series controller
Installation Overview
The Battery Backup Unit (BBU) attaches to the controller at three
points, as illustrated in Figures 1 through 3:
a
Slots on the edge of the controller (visible after removing the
PCI bracket) match to clips on the BBU
b
Receptacle on the controller matches to connector on the BBU
c
Post hole on the controller mates to post on the BBU
a) Clips
Figure 1. Points of connection on the BBU (bottom view)
100
3ware 9000 Series Serial ATA RAID Controller Installation Guide
b) BBU connector
c) post
Advertisement
Table of Contents
