Table of Contents
Advertisement
Appendix A. Installing the Battery Backup Unit
Installation Instructions
1
For full-height controllers, turn the controller memory-side
down on a flat surface.
2
Remove the screws that connect the PCI bracket to the
controller and set the bracket aside.
Half-height board:
bracket unscrews from
top side of board.
Figure 4. Removing the screws from the PCI bracket
3
For full-height controllers, turn the controller memory side up.
102
3ware 9000 Series Serial ATA RAID Controller Installation Guide
Full-height board: bracket
unscrews from bottom side of
board.
Advertisement
Table of Contents
