Table of Contents
Advertisement
Making Units Managed by a 3ware Controller Available to Windows
Making Units Managed by a 3ware
Controller Available to Windows
After the 3ware driver has been installed, you need to partition and
format the new units or disks.
1
Remove the driver diskette or CD, reboot the system, and log in
as the system administrator.
2
Use Disk Administrator to partition and format the new arrays
or disks:
a
From the Start menu, choose Administrative Tools >
Computer Management.
b
In the Computer Management window, under Storage,
select Disk Management.
Figure 23. Computer Management Screen
3
Follow the steps that appear on the screen to write a signature
to the drive.
4
Right-click on the drive and select Create Volume.
5
Follow the steps the appear on-screen to create a volume and to
assign a drive letter.
www.3ware.com
63
Advertisement
Table of Contents
