Dialling With A Configurable Key - Aastra 6730i User Manual

Dialling with a configurable key

You want to call someone whose phone number is stored under a configurable key.
To find out how to configure a configurable key, refer to the chapter
keys", page 64.
Dialling with the line key
You want to make a call via a line key.
Aastra 6730i/31i: You can make a call via a line key. Your Aastra SIP phone is
equipped with two dedicated line keys with LED (L1, L2). Your system administrator
can set up four additional line keys (making a total of six). The actual number of line
keys depends on the system configuration.
Aastra 6753i: You can make a call via a line key. Your Aastra SIP phone is equipped
with three dedicated line keys with LED (L1, L2, L3). Your system administrator can set
up six additional line keys (making a total of nine). The actual number of line keys
depends on the system configuration.
Press a fix line key directly or select a line by pressing the horizontal navigation key to
the right or left. The display will show the line number (1, 2, 3 etc.) and the line state
(free, busy).
You can switch the line by pressing the key. The active call is automatically parked
locally.
Aastra 6730i/6731i/6753i
eud-1614/1.1 – R3.0 – 12.2013
Redial list:
Press the Redial key.
➔
List of the last dialled entries is displayed.
To scroll through the call numbers last dialled, press the navigation key down-
wards.
Pick up the handset.
➔
The call number of the user is dialled.
To phone with the handset:
1. Pick up the handset.
2. Press the desired configurable key.
➔
The phone number is dialled.
Using your phone in handsfree mode:
Press the desired configurable key.
➔
The phone number is dialled.
Phoning
"Configuring
25