Dialling With A Configurable Key - Aastra 6735i User Manual

Making a call

Dialling with a configurable key

You want to call someone whose phone number is stored under a configurable key.
To find out how to configure a configurable key, refer to the chapter
keys", page 63.
Dialling with the line key
You want to make a call via a Line key.
You can make a call via a Line key. Your Aastra SIP phone is equipped with four perma-
nently set line keys with LEDs. Your system administrator can set up five additional
line keys (making a total of nine). Press a line key directly or select a line by pressing
the horizontal navigation key to the right or left. The display will show the line num-
ber (1, 2, 3 etc.) and the line state (free, busy).
You can switch the line easily by pressing the key. The active call is automatically
parked locally.
<Phone number>
26
To phone with the handset:
1. Pick up the handset.
2. Press the desired configurable key.
➔
The phone number is dialled.
Using your phone in handsfree mode
Press the desired configurable key.
➔
The phone number is dialled.
Enter the phone number.
Press a free Line key.
➔
The Line key is lit. The line is selected.
Pick up the handset.
➔
The phone number is dialled.
Parking the call and switching lines:
Press a second, free line key.
➔
The call is parked on line key 1 and the call on line key 2 is active.
Note:
Press line key 1 to return again to the call party on line 1 (see also chapter
kering between an enquiry call party and your call
"Configuring
"Bro-
partner", page 29).
Aastra 6735i/6737i/6755i/6757i
eud-1619/1.0 – R3.0 – 09.2013