Dialling With A Configurable Key - Aastra 6753i User Manual

Dialling with a configurable key

You want to call someone whose phone number is stored under a configurable key.
To find out how to configure a configurable key, refer to the chapter
keys", page 64.
Dialling with the line key
You want to make a call via a Line key.
Aastra 6730i/31i: You can make a call via a Line key. Your Aastra SIP phone is
equipped with two permanently set line keys with LEDs. Your system administrator
can set up four additional line keys (making a total of six). Press a line key directly or
select a line by pressing the horizontal navigation key to the right or left. The display
will show the line number (1, 2, 3 etc.) and the line state (free, busy).
Aastra 6753i: You can make a call via a Line key. Your Aastra SIP phone is equipped
with three permanently set line keys with LEDs. Your system administrator can set up
six additional line keys (making a total of nine). Press a line key directly or select a line
by pressing the horizontal navigation key to the right or left. The display will show the
line number (1, 2, 3 etc.) and the line state (free, busy).
You can switch the line easily by pressing the key. The active call is automatically
parked locally.
<Phone number>
Aastra 6730i/6731i/6753i
eud-1614/1.0 – R3.0 – 09.2013
Pick up the handset.
➔
The call number of the user is dialled.
Note:
The redial list is also available during a call.
To phone with the handset:
1. Pick up the handset.
2. Press the desired configurable key.
➔
The phone number is dialled.
Using your phone in handsfree mode
Press the desired configurable key.
➔
The phone number is dialled.
Enter the phone number.
Press a free Line key.
➔
The Line key is lit. The line is selected.
Making a call
"Configuring
25