Aastra 6730i User Manual page 13

The key configuration is not made directly on the phone. The following variants are
available:
• Aastra 400 communication system: The configuration has already been made by
your system administrator in the communication system.
• Aastra Self Service Portal: You can use the Aastra Self Service Portal (see chapter
"Aastra Self Service
keys however you wish.
More information on the configurable keys can be found in the chapter
keys", page 64.
Overview function key configuration (default key setting)
Aastra 6730i/31i/53i phones on the Aastra 400 communication system are delivered
with the following function key configuration. Please note that your system adminis-
trator may change this and your Aastra SIP phone may therefore differ from this
default configuration.
Function key
P1 key
P2 key
P3 key
P4 key
Key P5
Key P6
Key P7
(Aastra 6730i/31i only)
Key P8
(Aastra 6730i/31i only)
1)
The key assignment is configured with an empty function. The subsequent softkeys do not move.
Aastra 6730i/6731i/6753i
eud-1614/1.1 – R3.0 – 12.2013
Portal", page 7) where you can configure, change or delete the
Aastra 6730i / Aastra 6731i
System menu
• Voice mail menu
• Log in/out of free seating (if the
phone is configured as a free seat-
ing phone)
Callback
1)
Empty
Save
Delete
1)
Empty
1)
Empty
Keys, display and menu guidance
Aastra 6753i
Save
Delete
System menu
Callback
Deflect
Set up conference
--
--
"Configuring
13