Dialling with a configurable key
You want to call someone whose phone number is stored under a configurable key.
To find out how to configure a configurable key, refer to the chapter
keys", page 63.
Dialling with the line key
You want to make a call via a line key.
You can make a call via a line key. Your Aastra SIP phone is equipped with four dedi-
cated line keys with LED (L1, L2, L3, L4). Your system administrator can set up three
additional line keys (making a total of nine). The actual number of line keys depends
on the system configuration.
Press a fix line key directly or select a line by pressing the horizontal navigation key to
the right or left. The display will show the line number (1, 2, 3 etc.) and the line state
(free, busy).
You can switch the line by pressing the key. The active call is automatically parked
locally.
<Call number>
Aastra 6735i/6737i/6755i/6757i
eud-1619/1.1 – R3.0 – 12.2013
To phone with the handset:
1. Pick up the handset.
2. Press the desired configurable key.
➔
The phone number is dialled.
Using your phone in handsfree mode:
Press the desired configurable key.
➔
The phone number is dialled.
Dialling with the line key:
Enter the phone number.
Press a free line key.
➔
The line key is lit. The line is selected.
Pick up the handset.
➔
The phone number is dialled.
Parking the call and switching lines:
Press a second, free line key.
➔
The call is parked on line key 1 and the call on line key 2 is active.
Note:
Press line key 1 to return again to the call party on line 1 (see also chapter
kering between an enquiry call party and your call
Phoning
"Configuring
"Bro-
partner", page 30).
25