Using Labels - Aastra 6730i User Manual

Using labels

Printing and attaching the labels
Labels can be created and printed using the Aastra Self Service Portal (see chapter
"Aastra Self Service
DocFinder).
Aastra 6730i / Aastra 6731i:
1. Label the write-on labels via the Aastra Self Service Portal and print them (impor-
tant printing setting: "Page scaling for printing: None").
2. Cut out the labels according to the crop marks.
3. Remove the cover with the logo from above the control panel by pressing it down
lightly and pushing upwards.
4. Insert the label into the recess above the function keys on the control panel using
the openings for alignment. Ensure that the tabs protrude so that the label can be
removed afterwards.
5. Carefully re-insert the cover with logo so that the paper tabs are covered.
Aastra 6730i / Aastra 6731i
Aastra 6730i/6731i/6753i
eud-1614/1.1 – R3.0 – 12.2013
Portal", page 7) or an electronic document (available on
Keys, display and menu guidance
Aastra 400
17