Engine - Shutdown - MTU 8 V 4000 Lx2 xx Operating Instructions Manual

3.8 Engine – Shutdown
Preconditions
☑Generator is not connected to network.
NOTICE
Stopping the engine when it is running at full load subjects it to extreme thermal and mechanical
stresses.
Overheating of and, therefore, damage to components is possible!
• Before shutting down the engine, allow it to idle until the engine temperatures decrease and
constant levels are indicated.
Shutting down engine
u Shut down engine in accordance with stopping sequence specifications (→ Page 39).
44 | Operation | MS150114/01E 2015-03