MTU 8 V 4000 Lx2 xx Operating Instructions Manual page 89

1.4540.048 – SPI ADC Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
1.4540.049 – Sense 5V Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
1.4540.050 – Sense -9V Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
1.4540.051 – Sense 12V Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
1.4540.052 – ADC Test Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
1.4540.053 – CAN Timing Changed
Yellow alarm. Initiated by TecJet.
Cause
Change of CAN baud rate
detected.
1.4540.054 – Exception Error
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
Corrective action
u Restart TecJet.
Corrective action
u Restart TecJet.
Corrective action
u Restart TecJet.
Corrective action
u Restart TecJet.
Corrective action
u Restart TecJet.
Corrective action
1. Check settings.
2. Check cabling.
Corrective action
u Restart TecJet.
MS150114/01E 2015-03 | Troubleshooting | 89