Symbol MK2000 MicroKiosk Product Reference Manual page 41

Wired Ethernet: Power via POE
The POE installation option allows the MK2000 to communicate and receive power on the
same 10Base-T Ethernet cable, see Figure 2-7 on page 2-12.
POE should NOT be used in conjunction with an external power supply
connected to the power port on the MK2000. Using two power sources
may damage the MK2000 and/or the network.
1. Connect the Ethernet cable to the MK2000 Ethernet / Bias-T port, see Figure 1-3
on page 1-5.
2. Ensure the Ethernet cable is terminated according to Table 2-2 on page 2-20.
3. Plug the other end of the Ethernet cable into the Bias-T (POE) module.
4. Connect a patch cable from the Bias-T (POE) module to the host system's LAN
port.
Caution
Installation
2-11