Symbol MK2000 MicroKiosk Product Reference Manual page 173

Problem
How to load files into the MK2000.
Demo Application (Resident or
Laptop) does not work after
changes were made to the unit.
How do I configure the MK2000?
Parameter changes were not
retained after the MK2000 was
re-booted
.
Reg files values are not being
copied into the Registry at boot
time.
ControlPanel-StorageManager-
Properties-Defrag does not appear
to perform any action.
Table F-1. Troubleshooting (Continued)
Possible Causes
Demo program
parameter settings
inconsistent with latest
program changes and/
or corrupt files. Reload
the Demo Application
(Resident or Laptop).
Parameter changes
were not saved.
More than one .reg file
and duplicate registry
entries are present.
Defrag is not
implemented in
WinCE4.
Troubleshooting
Possible Solutions
See Downloading Files on page 5-3.
Locate and delete the files associated
with the Demo Application (located in
the My Computer/Application folder).
Then reload the files associated with
the demo application, for detailed
instruction on loading the demo
application, see Installing the
Resident Demo Application on page
4-4.
Refer to Setup and Configuration on
page 3-1.
Refer to Registry Persistence on page
6-2 and Save Configuration /
Generate a .reg File on page 3-14.
Ensure the .reg files in /Application
and /Platform have no conflicts.
Reload the partition.
F-3