Symbol MK2000 MicroKiosk Product Reference Manual page 118

MK2000 MicroKiosk Product Reference Guide
Starting The Application
After the mkconfig.reg file is loaded, press and hold buttons B and C until the display goes
blank (typically 15 seconds) then release buttons, see Figure 1-1 on page 1-3.
The MK2000 reboots to the Laptop Driven Demo Application.
Note: The MS IIS software must be enabled and working properly to run
the Laptop Driven Demo Application. If there is any doubt about the
MS IIS software running properly, uninstall and re-install the MS IIS
software.
Delete Current Laptop Driven Demo Application Version:
• Double tap the My Computer icon on the CE desktop
• Double tap the Application folder
Delete the mkconfig.reg file.
Note: Use the delete functionality contained in the Taskbar/Files to remove
the desired files.
Disable/Restore Laptop Driven Demo Application:
1. To prevent the MK2000 from entering the Laptop Driven Demo Application
simultaneously hold down buttons A and D just after the blue Performing System
Initialization (Phase 1) screen appears. The A and D buttons must be held down
before the message changes to Phase 2.
2. When the Enter Password prompt appears, enter DDBAC and touch OK on the
screen, or simultaneously press the A and B buttons for Enter.
3. The MK2000 enters Protected Mode and the Win CE desktop appears.
4. Double tap the My Computer icon.
5. Double tap the Application folder.
6. Use Taskbar/Edit cut function to cut the mkconfig.reg file from the My
Computer\Application folder.
7. Double tap the Up icon to return to the My Computer directory and Double tap the
My Documents icon to enter the My Documents folder.
8. Paste the mkconfig.reg file into the My Computer\My Documents folder.
9. Reboot the MK2000, the Windows
10. To restore the Laptop Driven Demo Application move the mkconfig.reg file back to
the My Computer\Application folder.
B-6
®
CE desktop will appear.