Getting Started; Installing Drives In The Driveless Model - Western Digital My Cloud EX2 Ultra User Manual

Getting Started

3

Installing Drives in the Driveless Model

Physically Connecting the Device
Getting Started Using Online Setup Software
Getting Started Without Online Setup Software
Accessing Content
It's easy to set up the My Cloud EX2 Ultra Private Cloud Storage device -- all you have to
do is unpack your device, connect it, and wait for the Power LED on the front of your
device to turn a solid blue. Then, download and run the quick setup software, available at
http://www.wd.com/setup.
Note: For information about safely shutting down and disconnecting the device,
Important: To avoid electrostatic discharge (ESD) problems, ground yourself by touching
Installing Drives in the Driveless Model
Important:
that come without drives. You may use a drive made by WD or one made by another
company. For a list of compatible drives, go to http://products.wdc.com/.
Important: Make sure the device is not connected to power or to the network.To avoid
Note:
MY CLOUD EX2 ULTRA PRIVATE CLOUD STORAGE
USER MANUAL
see "Utilities" on page 92
metal before handling the device.
Following are instructions for installing drives in My Cloud EX2 Ultra models
electrostatic discharge (ESD) problems, ground yourself by touching metal
before handling the device.
For further instructions on how to remove and replace a faulty drive, or to prepare
and insert a non-WD drive see
"Replacing a Drive" on page 100.
GETTING STARTED
11